Zip Hydrotap Bc100/75g4

Zip product

23% 23 percent off rrp

Department:

Zip Hydrotap

Zip Hydrotap Bc100/75g4

Extension & drip tray ZT008 not included

Superior Zip G4 thermal insulation now significantly reduces standby energy
consumption.

Power-Pulse™ technology maintains boiling water to within 0.2°C
of set temperature.

Boiling temperature can be pre-set: from 100°C down to 68°C.

Can be programmed to deliver chilled water with 5 pre-set temperature ranges.

Sleeps or “powers-off” after two hours of non-use, to minimise
daily power consumption.

Automatically sleeps when the kitchen goes dark, for added power savings
overnight.

Integral 24/7 automatic timer turns power on and off over weekends or weekday
periods.

User Safety

Choice of fingertip control for fast cup filling (lever down) or hands-free pot filling (lever up). Can be set to require finger-thumb safety button operation for access to instant boiling water. Can also be set to boiling water “isolation mode” for total safety when kitchen is unattended.

Healthier drinking

Inbuilt Zip 0.2 micron NSF-certified filter puts crystal-clear better-tasting water on tap, filtering out chlorine taste and odour and impurities as tiny as one five-thousandth of a millimetre, including protozoan cysts such as Cryptosporidium, but does not remove beneficial fluoride.
Free-Flow™ bottle filling: for continued supply of filtered water even when chilling capacity is exceeded. (Chilled only).

Manufacture:

Zip

Notes:

Five Year WarrantyAppliance warranty 24 months, plus additional 36 months boiling tank warranty.InstallationBoiling System: Open outlet, vented system, factory set to operate at 98°C.Flow rate 4.0 l/min.Chilling System: Fan-cooled condenser type, factory set to operate at 5-9�°C.Flow rate 4.0 l/min.Refrigerant R134a.Location: Tap should be positioned so it drains into a suitable sink. Alternatively tap can be installed away from any sink on it own ‘font’. Tap should be situated as closely as possible to directly above the under-sink Command Centre.Maximum distance from the base of the tap to the Command Centre is one metre. Command Centre must have clearances as shown on the drawings.Ventilation accessories (supplied) must be installed as per instructions.Plumbing: Must be installed In accordance with UK Water Supply Regulations.Designed for direct connection to a potable (drinkable) cold water supply with a minimum pressure of 0.7 bar (1.7 bar if fitted with booster unit or scale filtration and 2.0 bar with ‘Vented Mixer” kit). A 5 bar pressure limiting valve is fitted internally.An isolating valve should be installed between the water supply and the Command Centre.Electrical: Installation must comply with current lEE regulations.Model BC100/75G4 to be wired to a double pole 13 amp fused spur.Model BC140/75G4 is installed with an externally mounted 2.2kW booster unit and must be connected to two separate double pole 13 amp fused spurs.Limescale Prevention - IMPORTANT: In hard water areas where mineral scale accumulation may be an issue, consideration should be given to the maintenance required.We recommend use of the Zip Professional high performance Limescale Filtration System.

Material:

Stainless Steel

Zip
Code#:

BC100/75G4

MyTub Code#:

690557