Peak 32 24 V Terminal Block Kit Pk-kit3210-1

Johnson Controls product

23% 23 percent off rrp

Department:

VERASYS LC Smart HVAC R Controllers

Collection:

Johnson Controls Verasys

Peak 32 24 V Terminal Block Kit Pk-kit3210-1

Standard BACnet Protocol — Provides interoperability with other Building Automation Systems (BAS) products that use the widely accepted BACnet standard.

Standard Software and Application Development — Uses a common hardware design throughout the family line to support standardized wiring practices and installation workflows. Also uses a common software design to support use of a single tool for control applications, commissioning, and troubleshooting to minimize technical training.

Configurable Controller — Eliminates the need for software or programming in the field. Factory commission and programmed. Only configuration of parameters in the field through local display or MAP.

Real-time Switchable communication protocols from BACnet MS/ TP to Modbus or N2 — Is available through the onboard display or MAP Gateway one configuration parameter can be set to switch the protocol in real time.

Dedicated Modbus Integration bus — Provides interoperability with other Modbus devices through the dedicated Modbus master port.

Predefined alarms and trends — Based on HVAC/R application all alarms and trends will be predefined within the controller.

Onboard display with real time clock to support local scheduling and trends — Provides an onboard display for configuration and commissioning of the equipment, validation of controls, validation of alarms, faults, and control.

Auto-Tuned Control Loops — Reduce commissioning time, eliminate change-of-season re-commissioning, and reduce wear and tear on mechanical devices.

Universal Inputs, Configurable Outputs, and Point Expansion Modules — Allow multiple signal options to provide input/output flexibility.

Optional Local User Interface Display — Allows convenient monitoring and adjusting capabilities at the local device.

Optional Mobile Interface — Allow monitoring, servicing, and commissioning of the equipment through the MAP gateway, utilizing any smart mobile devices.

USB Port — Onboard USB port for firmware upgrades and backup/restore of configuration of the controller.

BACnet Testing Laboratories (BTL) Listing — Ensures interoperability with other BTL rev 12- listed devices. BTL is a third-party agency, which validates that BAS vendor products meet the BACnet industry-standard protocol.

Future Verasys Connectivity — Support of Equipment Model technology for plug and play of equipment to the system level.

OLD PART NUMBER PK-KIT3210-0 REPLACED WITH PK-KIT3210-1

The PEAK 18 and PEAK 32 Controllers are configurable controllers that can be switched between MS/TP, Modbus RTU, and N2 Communication protocols real-time through the onboard local display or through the Mobile Access Portal (MAP) Gateway. When the controllers are used as MS/TP devices, they are BACnet® Advanced Application Controllers (B-AACs) with integral RS-485 Master-Slave/Token-Passing (MS/TP) communications.
In order to select and download the application please go to Selector>Verasys Applications
PEAK 32, 24 Volts removable terminal block kit for all spade connections

Manufacture:

Johnson Controls